Door Handle Replacement
It's worth replacing door handles if you aren't happy with the way they look or if they're difficult to use. With a bit of patience, you can put in an entirely new handle in a short time.
Modern door handles are equipped with cover plates that conceal the screws to create a stylish appearance. However, you'll have to attach them separately if your new handle doesn't already have them.
Removal of the Old Handle
The door handle isn't only a decorative addition to your home it also serves as an important safety feature that lets you to lock and unlock your door. However, over time the door handle could lose its grip, feel loose, or look old and worn out. This is a sign that it's probably time for a replacement.
If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means that you can not lock or unlock your door which could be the risk of security for you and your family.
Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be dangerous, particularly for elderly or children members who struggle to open it. They may get trapped. It's easy to replace a broken handle on the door.
Modern door handles are generally standard sizes and will fit any door. If you are not sure if your new door handle will work, remove the old one and measure the holes in its housing. This will help you to purchase the right size door handle.
It is easiest to remove the door handle by taking it off from the door. This is usually done using the screw driver. Some door handles have a cover plate which hides the mounting screws. You will need to remove this to get to the screws. After removing the old handle, take note of the way in which the spindle is connected. This will assist you in aligning the new handle.
Alternately, you can take off the door handle by uncrewing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. However, you'll have to locate the tiny latch that is located on the edge cut piece. Once you've removed the latch, unscrew the handle from the strike plate, and then the latch off the door's edge.
The Strike Plate
If you are replacing the handle, you'll want to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The new handles will come with two latch plates which are a circular and a rectangular plate (see the above diagram which shows the various parts of the door handle). If you have a rectangular latch plate, replace it with an oval one. This will let the latch hook onto the strike plate, making the handle more convenient.
The first step is to take off the screw holding the old latch plate. door handle replacement andover are typically tight and require a lot of force to loosen them. If you are able, it could be beneficial to have another person assist with this part.
After the screws have been removed the latch should pull out of the door with ease. If the latch plate is stuck or won't move, use a small hammer to scrape the edges. This can sometimes open the plate up.
Now, you can proceed to creating the new door strike plate to be installed. Install the latch plate in the door jamb using the screws that were included with the new handles. Be careful not to over-tighten the screws, as this may cause damage to the strike plate.
If you're not sure whether the latch plate is in the proper position Try closing and opening the door to determine if it closes and latches correctly. If not, you'll need to adjust the strike plate either up or down, or forward or back until the door shuts and latches correctly.
If the door is still moving or jiggles, you may need to increase the size of your latch hole on the strike plate. This is more common with older doors, but can happen due to wear and tear, hinge mortises that are too narrow or are not sized correctly for the latch, or from a broken or damaged strike plate. If this is the situation, follow the same procedure for adjusting the strike plate, but with the use of a metal file instead an hammer and chisel.
Removing the Latch
The latch is an angled metal piece that slides in and out of a hole in the inside of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also connects to an opening in the door frame to keep the door shut. If your door is wiggles when you close it, changing the latch could be the only thing needed to correct the issue.
The screws that secure the door latch are hard to spot, but you can usually insert a screwdriver into a small hole on the trim plate and then pry the latch off. After you've removed the trim plate, it should be simple to take off the latch as well as the remaining bolts that hold the spindle and latch in place.
If the latch cannot be easily removed, use a paperclip or tool to take it off the handle mechanism. Place the item in the recessed latch slot and gently move it around until you feel the handle and latch begin to split. You may have repeat this process a few times before you are able to remove the latch.
You should be able to slide the new latch into its slot with no issues after you've removed the old one. Make sure that the latch is properly positioned in the slot and aligned with the screw chambers and then use the new screws to attach it to the strike plate and door frame.
Check the backset of the current handle (the distance between the center of the large hole on the front of the door and the edge) prior to installing the new handle. Check that the latch size of the new handle is equal to the measurement.
If you're replacing the latch or handle or handle, or if your previous lock cylinder is damaged then you'll need a new one. If you're not changing locks, the new latch should fit in the existing recess and work just fine with your current keys. Pick a latch that has rectangular cover plates that match your existing handles.
Take off the cover plate
Door handles can start to look worn over time If you replace them with a modern lever-on-rose designs, it's an easy and quick DIY project to decorate and will enhance the overall appearance of your home. You can purchase complete sets that come with matching escutcheons and privacy adaptor kits.
The first step in replacing the door handle inside is to remove the cover plate or rose, which covers the screws and inner mechanism. Find an opening tab on the plate, and make use of a flathead screwdriver to lift it off the knob. It may have an opening on one side or be secured by pins.
Remove the screw that is holding the handle in the interior and set it aside once the cover plate is removed. Remove the screws that secure both the inner and outer plates. You can loosen them by using the help of a Philips Screwdriver. Then, you can remove the outer plates and latch plate from the door and set them aside.
Some doors don't have this gap. If yours does not allow for a handle, you'll have to drill a new hole into the door. The procedure to do this is similar to the procedure opening a door using the lock, however you'll be taking extra care to avoid damaging the frame or door.
The installation of new door knob screws is necessary after the holes have been drilled. Purchase the same size as your old screws to avoid getting the handle too tight or loose. You'll also need to install an additional latch plate and strike rod that aren't included in the majority of door handle sets.
If you're looking for a high-quality replacement for your interior door handle set, try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received hundreds of 5-star reviews from happy customers. It's an excellent option for replacing worn out or damaged interior door hardware on your Chevy.